Overhauling a TCM forklift's F2SM engine? Part T-8AZJ-10-271 is the complete gasket set that covers the job — head gasket, valve cover, and every other sealing surface you'll disturb during a rebuild.
When you need this kit
- You're pulling the head to replace piston rings, valves, or a cracked head
- You're seeing coolant in the oil, or oil in the coolant — classic head gasket failure signs
- You're doing a full engine overhaul and want every gasket fresh in one pass
Compatibility
This set is built specifically for the TCM F2SM engine. It won't cross over to other TCM engine families, so confirm your engine code before ordering.
What's included
A complete gasket set covering the head gasket and the other sealing surfaces typically disturbed during an F2SM overhaul, so you're not tracking down individual gaskets piecemeal mid-job.
Installation overview
Clean all mating surfaces thoroughly before installing new gaskets — old gasket material and carbon residue are the most common causes of a fresh gasket leaking. Torque head bolts in the correct sequence and to spec, working in stages rather than all at once, and re-torque after the engine's first heat cycle.
Get the part
We stock the T-8AZJ-10-271 gasket set. View the TCM F2SM gasket set →